S-series Electronic Marshalling
„ I/O anywhere you need it
„ Single channel granularity
„ Reduces installed cost of system
„ Fully redundant architecture
„ Field-mounted capable hardware
„ Plug and play I/O
Product Data Sheet
The DeltaV CHARM I/O Card (CIOC) with CHARMs.
DeltaV™ S-series Electronic Marshalling delivers a new level of control system I/O performance with unprecedented
flexibility and ease of use. The CHARM I/O card (CIOC) supports up to 96 individually configurable channels and is designed specifically for multi-core home run cables in centrally located marshalling cabinets. It can also be installed in field junction boxes to further reduce system design and installation costs.
All communications are completely redundant from the channel (CHARM) to the DeltaV S-series controller.
I/O anywhere you need it: DeltaV CIOC provides an unprecedented flexibility in control system I/O topology. Using standard Ethernet infrastructure hardware you can add I/O anywhere you need it. From a local I/O cabinet to remote
enclosures miles away, simply install the hardware and connect it to the DeltaV control network. Each I/O card can serve I/O signals to any four controllers in the system with 50-ms updates for fast, reliable control.
Single channel granularity: The CHARM I/O architecture allows each individual channel to be characterized for the requirements of the field device. Any instrument signal can be wired to any terminal block. The channel is then electronically marshalled by installing the appropriate CHARM and assigning the channel to one of four controllers. Home run multi-core instrument cables can be landed in order on a series of CHARM terminal blocks without concern for signal types.
Reduces installed cost of system: DeltaV Electronic Marshalling helps reduce overall system costs by eliminating internal cabinet cross wiring, reducing overall footprint, simplifying I/O channel assignments, and reducing Factory Authorized Testing activities. Electronic Marshalling provides separation between I&E hardware installation schedules and control strategy development. Wiring can begin earlier knowing any late changes can be done without lifting a wire. Separation of the controller and I/O allows more efficient cabinet designs and accommodates late scope changes you can add I/O anywhere. Adding additional control capacity does not require re-wiring I/O. Simply assign the control modules and their I/O signals to the new controller, without lifting a wire.
杜先生：18682586325 QQ：2841236359 电邮：firstname.lastname@example.org
SE6501T01 SE6501T02 SE6501T05 SE6501T06 SE6502 SE4601T07 SE4601T09 SE4601T08 SE4601T05 SE4602 SE4613 SE4603T05 SE4603T06 SE4604T03 SE4604T04 SE4605T02 SE4605T03 SE4605T04 SE4301T01 SE4301T02 SE4301T07 SE4302T01 SE4302T02 SE4302T04 SE4302T05* SE4303T01 SE4303T02 SE4303T03 SE4303T04 SE4304T01 SE4301T03 SE4301T05** SE4301T04 SE4302T03 SE4302T51 SE4303T52 SE4302T55* SE6103 SE4501 SE4512 SE4502 SE4503 SE4504 SE4606T02 SE4606T03 KJ4005X1-BF1 KJ4010X1-BC1 KL1601X1-BA1 KL1602X1-BA1*